Points It’s Important To Know About Carbide Burrs

Carbide Burrs (often known as Rotary Burrs) can be used for cutting, shaping, grinding but for the removal of sharp edges, burrs and excess material (deburring).

1. What material can Carbide Burrs be utilized on?
Carbide burrs can be used on many materials. Metals including steel, aluminum and surefire, all sorts of wood, acrylics, fibreglass and plastics. When suited for soft metals including gold, platinum and silver, carbide burrs are excellent as they can last quite a long time without having chipping or breaking.

Steel, Carbon Steel & Metal
Gold, Platinum & Silver
Plastic, Carbon fibre Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Different cuts of carbide burrs will probably be best suited to specific materials, begin to see the next point below to discover more on the several cuts.

What Do You Use Carbide Burrs In?
Ideally carbide burrs are utilized in Air Tools i.e Die Grinders, Pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools say for example a Dremel.

Always employ a handpiece that runs true i.e without wobble.

Who Uses Carbide Burrs?
Carbide burrs are trusted for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And are found in the aerospace, automotive, dental, metal sculpting, and metal smith industries to only a few.

2. Carbide Burrs Commonly Can be found in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs use a right handed (Up cut) spiral flute. These are generally combined with metal, hardened steel, copper, certain, and ferrous metals and will remove material quickly which has a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.

Heavy removing material
Creates long chips

Double cut carbide burrs usually are suited for ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials for example plastics and wood. They have more cutting edges and may remove material faster. Double cut are now and again referrred to as Diamond Cut or Cross Cut (2 flutes cut across the other person) leaves a smoother finish than single cut on account of producing smaller chips as they cut away the fabric. Use for medium-light stock removal, deburring, finishing and cleaning. A double cut carbide burr is easily the most popular cut and will look at you through most applications.

Medium- light removing material
Fine finishing
Smooth finish
Creates small chips

3. What Speed or RPM if you work with your Carbide Burrs?
The speed of which you use your carbide bur inside your rotary tool is determined by the pad you use it on and the contour being produced however it is safe to say you do not need to exceed speeds of 35,000 RPM.

4. Don’t Apply Too Much Pressure
Like all drill bits and burrs, allow the burr do the work and apply merely a little pressure otherwise the cutting edges with the flutes will chip away or become smooth prematurely, reducing the lifetime of your burr.

5. Carbide Burrs are not as easy Than HSS Burrs
Our Carbide Burrs are machine ground coming from a specially chosen grade of carbide. As a result of extreme hardness in the Tungsten Carbide they could be utilized on a lot more demanding jobs than HSS (High Speed Steel).

Carbide Burrs also perform better at higher temperatures than HSS to help you run them hotter, and for longer.

HSS burrs will start to soften at higher temperatures so carbide is always a more sensible choice for too long term performance.

Which are the Advantages of Tungsten Carbide Burrs?
Long life
Use for too long production runs
High stock removal
Perfect for using on many hard and difficult materials
Perfect for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings

6. Keep your Carbide Burr On the go
When you use your carbide burr try not to ensure that it stays still for days on end as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.

End with an ‘up’ stroke for any smoother finish in your work.

Stay Safe:
Always keep your burr shank is well inserted into the collet and clamped down tightly
Keep pressure light and keep the bur moving, focusing on the highest material first
Keep your work is secured tightly on your work bench
Don’t snag or jam your burr to your work
Wear eye protection at the least, but better still work with a full shield for your face
Check out about SF-1 Carbide Burrs view this site

Leave a Reply