Making a Modded Xbox Controller

The Xbox One system is an amazing package alone. However, with games like Cod 5, Modern Warfare, and Modern Warfare 2, a great number of find top reasons to get a new said video game console, or its accessories. The type of modification is a a reaction to produce a rapid fire modded Xbox One controller. Listed here are the steps on the way to modify your original controller into a rapid fire controller.

1. Unscrewing the controller

Before starting taking your controller apart, have a close look on the controller first and then try to remember which parts go where since you will eventually ought to put everything back again. Begin by unscrewing all of the visible screws behind. After that, before you tug involved, eliminate the batteries to reveal the hidden screws. Remove these too.

Step 2. Preparing true

With the controller facing down, slowly and carefully separate the front 50 % of the casing from your circuit board. A hole in the case may ultimately need to be made. Consider this before putting things back.

Step # 3. Placing The Rapid Fire Button

While other strategies to modifying the controller usually do not involve setting up a new button, this type of guide does. In addition this assist you to adjust the rate of rapid fire, it minimizes tampering with other aspects of the circuit board, thereby minimizing the risk of damaging your modded Xbox One system controller.

Remember, kits for that rapid fire controller can be obtained easily. It’s the button out of this kit that is to be placed from the hole within the casing, so install it gently before the circuit board is returned. You might want to snip out several flaps to generate means for the wires with the kit. This can be achieved with the cutter or a pair of scissors.

Step four. Soldering

Let’s assume that you are aware how to correctly use a soldering iron, attach the red wire towards the leftmost pin of the 4-pin horizontal series, while the blue wire solders on the rightmost pin the exact same series. The black (or green occasionally) wire attaches to the core of the three vertical series to the right with the switch.

Soldering is easily the most crucial key to making the modded Xbox controller. It is because mistakes made in this stage can permanently damage your controller.

rapid fire controllers ps4 . Putting everything back

Carefully being attentive to the wires, attempt to close the circuit board and the casing. This may be a little tricky for the reason that new wires can get when it comes to things. Have the option of these wires to occupy the empty spaces as opposed to stuffed. You could possibly retain the modded Xbox One console controller facedown so your buttons don’t fall and maneuvering the wires certainly are a little easier. Position the casings together but don’t return the screws yet.
You now need to see if the rapid fire buttons work. If they don’t, you might need to restart both your console along with the now modded Xbox controller. This would solve the challenge. When it doesn’t then you might need to go from the steps again to double check.

For more information about xbox one modded controllers go to our net page.