Specifics You Have To Be Informed About SA-1 Carbide Burrs

SA-1 cylinder shape burrs are great for interior contour work and deburring. Due to extreme hardness of the tungsten carbide, technology-not only on considerably more demanding jobs than HSS (High-Speed Steel). These carbide burrs are made of tungsten carbide burr die grinder bits and definately will will soften at higher temperatures, so carbide is obviously a good choice for long-term performance.

Double cut or Cross cut carbide burrs are generally suited for ferrous and non-ferrous metals, soft steel, as well as all non-metal materials including stone, plastics, hard wood, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut on account of producing smaller chips because they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is easily the most popular cut and definately will look at you through most applications.

Cut – Double Cut
Max RPM – 70,000, yet it’s uncommon to wish a lot more than 35,000 RPM.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper

Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone

Cylinder Shape burrs are great for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined through the material you are using your burr on. If you happen to be experiencing chipping, you are most probably operating at excessive of speed to the application. Start using a slower speed and increase as you go along until you achieve the the best results
Apply light pressure and allow the tool perform the work. Bearing down on the tool will result in reduced tool life and a dull burr.

Always wear proper PPE to add (although not limited by) safety glasses, hearing protection, respirator, and baseball gloves. Keep all guards set up in your machine.
Avoid experience electrical energy drills; the slower speeds can result in chipping of one’s workpiece.
More info about SA-1 Carbide Burrs see this popular web portal