Facts It’s Essential To Be Familiar With Sa-3 Cylinder Shape Premium Tungsten Carbide Burr

SA-3 cylinder shape burrs are ideal for interior contour work and deburring. Because of the extreme hardness of the tungsten carbide, quite a few on considerably more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs usually are suited for ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials like stone, plastics, wood, and ceramic. Double cut burrs will leave a slightly smoother finish than single cut due to producing smaller chips since they cut away the material. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is easily the most popular cut and definately will look at you through most applications.

Machines Suited for:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are great for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed is determined by the material you are using your burr on. If you might be experiencing chipping, you’re probably operating at way too high of speed for the application. Start which has a slower speed and increase on the way until you achieve the best results

Apply light pressure and allow the tool carry out the work. Bearing recorded on the tool can lead to reduced tool life along with a dull burr.

Always wear proper PPE to include (however, not limited to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in place on the machine.

Avoid use on electrical power drills; the slower speeds can result in chipping of one’s workpiece.
To read more about SA-3 Carbide Burrs go this popular internet page