Points It’s Essential To Be Informed On Sa-3 Cylinder Shape Premium Tungsten Carbide Burr

SA-3 cylinder shape burrs are good for interior contour work and deburring. Due to extreme hardness with this tungsten carbide, you can use it on much more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs usually are utilized on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hard wood, and ceramic. Double cut burrs leaves a somewhat smoother finish than single cut because of producing smaller chips because they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and definately will see you through most applications.

Machines Utilized on:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined through the material you use your burr on. If you might be experiencing chipping, you are most probably operating at too much of speed for your application. Start having a slower speed while increasing on the way until you achieve the greatest results

Apply light pressure and allow tool carry out the work. Bearing down on the tool can lead to reduced tool life and a dull burr.

Always wear proper PPE to add (although not tied to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in position on the machine.

Avoid use on electrical energy drills; the slower speeds can result in chipping of the workpiece.
To get more information about SA-3 Carbide Burrs go to see the best website